Unit of Measure
Specifications
Voltage |
N/A DC 20 to 56 V |
Contact Type |
N/A Contact maker NO (MOSFET) or contact breaker NC (MOSFET) |
Contact (primary) |
N/A Contact maker (NO) |
Primary switching function setting range temperature |
N/A 14 to 122 °F |
| Secondary switching function humidity setting1 | N/A 65 % RH pre-set |
Switching Difference (temperature) |
N/A 3 K (±1 K tolerance) at +77 °F (+25 °C), 50 % RH |
Technical Data
Service LIfe |
N/A > 100,000 cycles |
Max. Switching Capacity (Relay Output) |
N/A DC 13 A |
Operating/Storage Humidity |
N/A Max. 90 % RH (non-condensing) |
| Connection2 | N/A 6-pole terminal: stranded wire AWG 16 (1.5 mm2); max. AWG 12 (2.5 mm2) |
Housing |
N/A Plastic, UL 94V-0, grey (bicolor) |
Mounting |
N/A Clip for 35 mm DIN rail, EN 60715 |
Mounting Position |
N/A Vertical |
Operating Temperature |
N/A -22 °F to +122 °F (-30 °C to +50 °C) |
Storage Temperature |
N/A -40 to +176 °F (-40 to +80 °C) |
Dimensions |
N/A 3.7 x 2.1 x 1.7" (93 x 53 x 44 mm) |
Weight |
N/A Approx. 4.2 oz. (120 g) incl. sensor |
Protection Type |
N/A IP20 |
Agency Approvals |
N/A VDE,EAC |
Reaction Time |
N/A Approx. 5 sec. |
External Sensor |
N/A Cable 2 m with snap in connector (included in the delivery) |
Optical Indicator |
N/A LED |
- 1 Versions with secondary switching function can also register the temperature and therefore offer an additional protection for electronics.
- 2 When connecting with stranded wires, wire end ferrules must be used.
