Unit of Measure
Specifications
| Model1 | N/A Thermostat with connector for external sensor |
Power |
N/A 200 W |
Voltage |
N/A DC 24 V |
| Setting Range2 | N/A -4 to 104 °F |
Technical Data
Rec. pre-fuse T (time-delay) |
N/A 25.0 A |
Heating Element |
N/A High performance cartridge heater |
Overheat Protection |
N/A With automatic reset and second-tier one shot fuse to protect against overheating in case of fan failure |
Heat Sink |
N/A Extruded aluminum profile |
Wiring Compartment |
N/A Plastic, UL 94V-0, black |
Axial Fan, Ball Bearing |
N/A 50,000 h at 77 ºF (25 ºC) |
Air Flow, Free Blowing |
N/A 94 cfm (160 m3/h) |
| Connection3 | N/A 2-pole „Push-In“ connection clamp stranded wire AWG 16 (1.5 mm2) with strain relief; max. AWG 12 (2.5 mm2) |
Mounting |
N/A clip for 35 mm DIN rail, EN 60715 or M6 screws and washers (not included), torque 2 Nm max. |
Position |
N/A Vertical airflow (air outlet up) |
Dimensions |
N/A 3.9 x 6.6 x 7.0" (99 x 168 x 179 mm) |
Weight |
N/A 2.86 lbs. (1.3 kg) |
Operating Temperature |
N/A -4 to +167 °F (-20 to +75 °C) |
Storage Temperature |
N/A -40 to +176 °F (-40 to +80 °C) |
Operating/Storage Humidity |
N/A max. 90 % RH (non-condensing) |
Protection Type |
N/A IP20 |
Protection Class |
N/A II (double insulated) |
Approvals |
N/A UL File No. E234324, VDE, EAC |
- 1 The external sensor needs to be ordered separately.
- 2 Switching difference temperature: 3 K (±1 K tolerance) at +77 °F (+25 °C), 50 % RH; Switching difference humidity: 4 % RH (±1 % tolerance) at +77 °F (+25 °C), 50 % RH.
- 3 When connecting with stranded wires, wire end ferrules must be used.
