Request Information
  • Energy saving LED technology
  • Wide voltage range
  • Integrated power unit
  • Magnet, screw or clip mount
  • Wide variety of connections
  • Dual cage clamp for quick wiring


    • The LED 025 light series is suitable for all types of panels and enclosures, especially where space is at a premium. These lights have a very long service life due to the use of LED technology. They are available with powerful non-slip rubberized magnets allowing them to be easily positioned in any steel enclosure. Screw and clip mounting are also available as options. The Ecoline series is a simplified version of the standard LED 025 light and has a dual cage clamp for connection instead of connectors. Nonetheless it is suitable for daisy-chaining and allows for up to 10 lights to be connected to each other.
    Unit of Measure

    Specifications

    Operating Voltage

    		 N/A DC 24 – 48 V (min. DC 20 V, max. DC 60 V)
    Switch1 N/A N/A
    Agency Approvals2 N/A UL File No. E234324, VDE (REG.-Nr. E788)1, EAC

    Mounting

    		 N/A magnet, M5 screws (not included), or clip (M6 screws),
    torque 2 Nm max.

    Technical Data

    Power Consumption

    		 N/A max. 5 W (~ 75 W incandescent bulb)

    Luminosity

    		 N/A 400 Lm at 120° (1,200 Lm at 360° or equivalent 95 W light bulb)

    Lamp Type

    		 N/A LED, 120° angle of radiation
    light color – daylight, color temperature – 6,000 to 7,000 K

    Service Life

    		 N/A 60,000 hrs. at 68°F (20°C)

    Connection

    		 N/A 2-pole dual cage clamp for solid wire AWG 14 (2.5 mm2),
    and stranded wire (wire end ferrule) AWG 16 (1.5 mm2)

    Housing

    		 N/A plastic, transparent

    Operating/Storage Temperature

    		 N/A -22 to +140 °F (-30 to +60 °C ) / -40 to +185 °F (-40 to +85 °C)

    Operating/Storage Humidity

    		 N/A Max. 90 % RH (non-condensing)

    Dimensions

    		 N/A see drawings

    Weight

    		 N/A approx. 7 oz. (200 g)

    Protection type/Protection Class

    		 N/A IP20 / II (double insulated)

    Mounting Instructions

    		 N/A The lights are available with magnet mount for easy positioning in any steel cabinet or enclosure. Other options are the LED 025 with screw mount, and specifically designed clip holders for clip mount of the LED 025. These can be positioned anywhere in the cabinet by simply screwing the holders to the cabinet wall. The light is snapped into the clip holders and can be turned in both directions. With a total rotation angle of 180° it provides perfect illumination within the cabinet or enclosure.
    • 1 Passive Infrared (PIR) motion sensor is factory pre-set to turn the light off 5 minutes after all motion ceases
      Note: The lights are not approved for household lighting.
    • 2 VDE Certificate of Conformity (REG.-Nr. E788);