DAK 284 Ventilation Cable Gland
Accessories
Cable gland with integrated ventilation
High degree of protection
Easy to install
Integrated strain relief
Waterproof filter
Large clamping range
Pressure differentials in enclosures with a high degree of protection are a result of internal and external temperature changes. In the case of negative pressure or partial vacuum, dust and humidity can enter the enclosure through the door seal. When the air inside the enclosure cools down, condensation may occur because the humidity cannot escape the enclosure. The innovative and easy-to-install ventilation cable gland DAK 284 enables secure cable entry into an enclosure with simultaneous pressure compensation (protection type IP66 / IP67). Even with a slight overpressure, a waterproof filter inside the gland allows the humidity to escape whilst blocking water and dirt from entering the enclosure.
Pressure differentials in enclosures with a high degree of protection are a result of internal and external temperature changes. In the case of negative pressure or partial vacuum, dust and humidity can enter the enclosure through the door seal. When the air inside the enclosure cools down, condensation may occur because the humidity cannot escape the enclosure. The innovative and easy-to-install ventilation cable gland DAK 284 enables secure cable entry into an enclosure with simultaneous pressure compensation (protection type IP66 / IP67). Even with a slight overpressure, a waterproof filter inside the gland allows the humidity to escape whilst blocking water and dirt from entering the enclosure.
Part # |
Thread Size M |
Thread Length L |
Cable Dia. Clamping Range D |
Torque Lock Nut |
Air Permeability |
Weight |
3D & 2D CAD |
|---|---|---|---|---|---|---|---|
| 28410.0-00 | Thread Size M N/A M12 x 1.5 | Thread Length L N/A 0.31 inches (8 mm) | Cable Dia. Clamping Range D N/A 0.16 - 0.32 inches (4 - 8 mm) | Torque Lock Nut N/A 2 Nm | Air Permeability N/A 25 l/h | Weight N/A 0.25 oz. (7 g) |
3D & 2D CAD
N/A 
|
| 28411.0-00 | Thread Size M N/A M16 x 1.5 | Thread Length L N/A 0.39 inches (10 mm) | Cable Dia. Clamping Range D N/A 0.16 - 0.32 inches (4 - 8 mm) | Torque Lock Nut N/A 2 Nm | Air Permeability N/A 25 l/h | Weight N/A 0.28 oz. (8 g) |
3D & 2D CAD
N/A
|
| 28412.0-00 | Thread Size M N/A M20 x 1.5 | Thread Length L N/A 0.39 inches (10 mm) | Cable Dia. Clamping Range D N/A 0.24 - 0.48 inches (6 - 12 mm) | Torque Lock Nut N/A 5 Nm | Air Permeability N/A 40 l/h | Weight N/A 0.46 oz. (13 g) |
3D & 2D CAD
N/A
|
